Name: RADOX RAILCAT CAT5e tinned/silver plated
Brand: ESE - Electronic Testing Systems
SKU: NO1333

Features

General Properties

Halogen free electron- beam cross linked cables with improved behaviour in case of fire, easy to strip, soldering iron resistant and flexible. Meet the requirements of EN 50288- 2- 2 and IEC 61156- 6.

Characteristic Impedance: f = 100MHz, 100 + 5 Ω
Resistance unbalance at 20 °C: ≤ 1.1 Ω / km
Capacitance:
core / core < 56 pF / m
core / screen ≤ 100 pF / m
Voltage rating: 300 VAC
Test voltage, 50 Hz, 5 min.: 2000 VAC
Screening attenuation 30 MHz ≤ f ≤ 100 MHz, 40 dB
Transfer impedance: f ≤ 30 MHz, 200 mΩ/m
Temperature range:
fixed - 50 + 90°C
sporadic movement - 40 + 90 °C
Min. bending radius:
Fixed 6 x cable dia
sporadic movement 10 x cable dia (12568935 / 84142178 / 85086347)

APPLICATION

The cables are intended for permanent installation in rail vehicles or for applications in which a limited alternating bending stress occur during service. (see table) Guidelines for selection and installation are described in the standard EN 50343.

Standard

In conformity with		Standard
Fire protection on railway vehicles, hazard level	HL1 - HL3	EN 45545
Vertical flame spread Vertical flame spread, bunched, 6 < D < 12 mm Smoke density Corrosivity of combustion gases Amount of halogen acid gas Content of fluorine Toxicity	50 L <2.5 m T ≥ 70 % pH ≥ 4.3, C ≤ 10 µS/mm HCI+HBr ≤ 0.5% HF ≤ 0.1% ITC ≤ 6	EN 60332- 1- 2 EN 60332- 3- 25 EN 61034- 2 EN 60754- 2 EN 60754- 1 EN 60684- 2, 45.2 EN 50305, 9.2
Fire protection on railway vehicles	Fulfilled	NFPA 130
Vertical flame spread Vertical flame spread, bunched Smoke density	L ≤ 1.5 m TSR ≤ 150 m2, PSRR ≤ 0.40 m2/s	UL 1685, 12 (FT4 exp.) UL 1685, 12 (FT4 exp.)
Requirement of hazard level code M:	(according to EN 50264-1 or EN 50306-1)
Extra low temperature Extra oil resistance Extra fuel resistance	- 40°C IRM 902, 72h, 100°C IRM 903, 168h, 70°C